Sunday, 13 November 2016

UFR Offshore NDT Supervisor at Total Upstream Nigeria Limited (TUPNL)

Onstream Group - With more than three decades of global industry experience, the company is now structured as a group of business units, each with its own specialisations.UFR Offshore NDT Supervisor at Total Upstream Nigeria Limited (TUPNL)

Through these units, the Group can provide tailored services to address the needs of our clients worldwide in the most effective and competitive manner.

Our client, Total Upstream Nigeria Limited, is recruiting to fill the positions below:


Job Title: UFR Offshore NDT Supervisor
Location: Lagos

Job description
The holder of this position shall provide a valuable technical expertise in non destructive testing of steel structures and pipelines, he will be fully conversant with MPI, Dye-penetration, AUT, manual UT and Radiography techniques applied in the control of pipelines and structures welds. During the offshore installation phase, he will be working in a shift in order to ensure 100% coverage of inspection on the laybarge working 24hrs per day.

Activities
The UFR Offshore NDT supervisor is responsible for all Offshore NDT activities during his shift and is directly accountable for the correct interpretation of all AUT and other NDT activities.

NDT Activities
As the specialist in pipeline/structural Non Destructive Testing, on board the UFR CTR flowlines laying vessel the NDE Interpreter shall:

  • Make sure the weld preparation and fit-up are acceptable as per specifications;
  • Make sure the welds and their non destructive testing are duly identified;
  • Ensure that NDE equipment and procedure on use onboard are in accordance with the project specifications;
  • Ensure all pipeline welds AUT or X-rayed during his shift are duly interpreted by the NDE agents of CONTRACTOR;
  • Supervise NDE processing and make sure it is done according to good workmanship;
  • Witness all the NDE done during his shift, make his own interpretation of the results and agree with the NDE;
  • CONTRACTOR about the status to be given to the welds. In the absence of TPA onboard the vessel, the NDE Supervisor will act as the highest technical authority on board to validate NDE interpretation;
  • Inform the COMPANY Main Representative about all shortcomings, problems and/or major defects detected in the fabrication;
  • Ensure that the traceability of NDE results is well maintained onboard through appropriate QC records. Collect the inspection reports carried out during its shift and file them properly on board available for the CY main representative;
  • Liaise with UFR welding specialist when required. 
During the mobilisation phase, he shall be able to judge the capability and skillfulness of welders in order to support the following:
  • Inspection and expertise of any NDE carried out on installation aids or auxiliary fabrications as per specifications;
  • Evaluation of the NDE to be carried out on auxiliary fabrications if they are not specified in the NDE manual;
  • Assessment of welders;
  • Collection and verification of welders certificates;
  • Follow-up of welders.
HSE
  • Safety is the core value of the COMPANY'S Group and shall be the first and foremost priority for all COMPANY offshore personnel. The NDT Supervisor shall demonstrate exemplary HSE behavior and ensure that all acts under his supervision are conducted in a safe manner according to the COMPANY'S Golden Rules, CONTRACTOR HSE rules and all international and local regulations. In particular the NDT Supervisor shall:
  • Report safety improvements, anomalies and incidents according the HSE management system on board the vessel;
  • Stop immediately all unsafe acts by COMPANY, CONTRACTOR or third party personnel;
  • Be a safety leader for all CONTRACTOR and subcontractor staff in his domain of supervision;
  • Not engage in any unsafe acts.
Accountabilities
  • The Offshore FJC supervisor is accountable to for:
  • The correct execution and interpretation of all NDT activities on board
Job Requirements
  • Previous offshore AUT experience on board J-Lay a pipe laying vessel;
  • AUT and X-ray radiography interpretation qualification up to date;
  • Certified UT inspector: Level 2 (3rd party) as per ISO 9712 or, Level 3 as per ISO 9712;
  • Fully conversant with DNV OS-F101 / API 11-4 welding code as well as GS EP PLR 420/421 and 430;
  • Having a solid experience in AUT and film reading for offshore pipeline;
  • Fluent in English (verbal and written);
  • BOSIET certificate;
  • 28 day rotation (4 x 4).
How to apply
Interested and qualified candidates should;
Click here to apply


Application Deadline Date
Not stated

0 comments :

Disclaimer: Note that we make every effort to verify the authenticity of our daily posts, we encourage our readers to also confirm before application. Our advice for you is never to pay any amount of money to any recruiter for job aid or educational consultant for admission aid.
Related Posts Plugin for WordPress, Blogger...
Loading...

Get Exclusive Job Alert And Educational News From Us!

Join Over 100,000 Registered Subscribers Today.


Enter your email address:

Delivered by FeedBurner | Follow Us On Twitter | Like Our Facebook Fan Page


Register Now To Get Quality Job Vacancies, Educational News, And Articles Update.